Q:"I am worried about my child in the rear seat. It gets so hot, and I always see him/her squinting when I look in the rear view mirror."

A: Quantum film will reduce heat by up to 63%. It will block out 98% of the suns harmful rays. And it can also substantially reduce glare depending upon the shade of film you choose.

Q: Does Quantum film keep my car cooler?

A: Quantum film has up to 63% heat rejection.

Q: Will Quantum film protect me from the sun?

A: Quantum film blocks 98% of the suns harmful uv rays.

Q: Will Quantum film protect my interior?

A: Interior fade and cracking are caused by the suns harmful uv rays. Quantum film will block 98% of the suns harmful uv rays.

Q: Can I roll my windows down?

A: You must wait 48 hours before rolling windows down.

Q: How should I clean the inside of the windows?

A: You should clean your film with soap and water. If you purchased Quantum film you can clean the film with Windex. It is best to spray the Windex onto the towel and then wipe the window.

Q: What is the curing process?

A: Curing is the time it takes for the water and adhesive to interact with each other and create a complete adhesion with the window glass.

Q: How long is the curing process?

A: It can take between 7 to 28 days for a complete cure.

Q: Can the window tint be scratched?

A: There is a scratch resistant coating on the film. However, the film can be scratched or punctured with keys, watches, rings, etc. Scratches caused by user neglect are not covered by warranty.

Q: I like having natural light but the heat is too much, will window tint help?

A: Yes, having the windows in your house tinted will block a lot of heat from entering your home, but will not block natural light.

Q: What other benefits can I expect from getting the windows in my home tinted?

A: There are many other benefits that you will receive from tinting your windows:

• Reduced heating and cooling cost
• Prevents premature fading of carpet and furniture
• Blocks harmful UV rays
• Reduces excessive glare
• Hold broken glass together for easy and safe clean up

Q: I like being able to see out of the windows in my house but I don't want anyone looking in, are there different types of tint for that?

A: Yes, we have tints that are reflective on the out side so it gives you privacy without blocking your view.

Q: I am interested in tinting the windows in my home. How do I go about getting that done?

A: Give us a call and set up an appointment for us to have someone come out to your home to measure the windows you want to have tinted. Then in a couple of days we will give you a call with a quoted price, and then we can set up an appointment for our team to come tint your house.

Q: Will Window Film help my business save money?

A: Yes. Tinting the windows in your business can save you money in several different ways.

• Installing Window tint as part of an energy saving plan will help maximize your IRS tax deductions.
• Having Tint reduces the overall heating and cooling cost of your business building.
• Blocks Harmful UV rays that fade furniture
• Lets in natural light

Q: Glare from the windows in my building causes me and my employees a lot of grief, will tinting the windows help?

A: Our Tints will help create a stable and comfortable working environment by reducing heat and cutting down glare from the sun.

Q: My office requires privacy, is there a window film solution?

A: Yes, we have films that will give you all the benefits of regular tint and will also Block the view from the outside.

Q: Are there any security benefits of our window films?

A: Our regular commercial tints will keep prying unwanted eyes from looking in and will deter criminals by holding broken glass together, but there are limits to what tint can do.  We also carry armor coat films if your business requires added window security.

Q: What are Armor Coat Films?

A: Armor Coat Films are thick durable films that are applied onto glass to keep them from breaking during break-in attempts.  They can also hold up against bomb blast, sonic booms, and sever weather conditions.

Q: I've heard great things about GrafitiGard, does Mr. Tint carry GrafitiGard?

A: Yes, we do carry Grafitigard.

Q: What is the purpose of GrafitiGard?

A: GrafitiGrad keeps vandals from defacing doors, walls, mirrors and any other non-porous surface you wish to protect.

Q: Why should I get GrafitiGard?

\ A: GrafitiGrad keeps surfaces looking new with out the hassle of repainting, replacing, and resurfacing vandalized areas. GrafitiGard is also easier to clean then most surfaces making maintenance a breeze.

Q: Why is Clearbra better than all the other protections?

A: Paint protection increases the value of the car when it comes time to resell it. Rocks, insects, and debris can significantly show wear on your paint job within a short period of time. This is particularly true in harsh winter areas where sand is poured on the roads for traction. Vinyl bras can catch dirt and debris between it and the hood causing scratches and discoloration. A properly installed clear bra can solve both of these problems.

Q: What is Clearbra?

A: Basically, it is a relatively thick, pliable film that has a strong adhesive on one side and a chemical resistant layer on the other side. Once it is properly applied to the car's painted surface it become a shield protecting against rocks and debris thrown up by vehicles on the highway and bug splats keeping the paint underneath in perfect condition. An additional bonus is the material's nearly invisible protection, not changing the look of your car, like an ugly black vinyl bra or bug deflector.  

Q: I've never heard of it, Where did it come from?

A: The material was originally created to protect military jets and helicopters from damage due to sand during Operation Desert Strom. So, it has only been around for la relatively short time, but is very quickly becoming more popular.  

Q: Can the film be removed if needed?

A: Yes, Clear Bra film can be removed and replaced if damaged in some way or if it is starting to look rough after several years of protecting your car from the elements.

Q: How should I care for the Clearbra once it is installed?

A: First, you should give it several days to finish drying before you wash the car. After that, treat it just like it wasn't there. When using a pressure washer, you should make sure to keep the nozzle at least 24" away from the Clear Bra, as 2000 psi of water can damage just about anything, and will damage the clear bra material. When waxing the car, wax right over the clear bra. You may notice a buildup of wax along the upper edge of the material, and a soft toothbrush works well to clean that edge.  

Q: What is the expected life of the film?

A: Our Clear Bra film has tested the film under adverse weather conditions over 4 years with no adverse effects. If a large stone where to hits the film at a high enough speed it will take a small nick out of the film. Over time, more and more nicks will accumulate and you may decide to go ahead and have the film replaced. If you spend a lot of time on the highway, the material may need to be replaced more often. Generally speaking, our film will be good for 5 to 10 years or more.  

Q: How long does it take to install?

A: This mainly depends on how much coverage you are looking for and the difficulty of the job. An average job takes about 5 hours. If more coverage is desired or custom work is necessary we will ask to keep the car over night to give us ample time to do a quality job.

Q: What parts can be protected by the clear auto bra?

A:

• Hood
• Fenders
• Front Bumper
• Side mirrors
• Headlights/Foglights
• Roof edge  
• Sides of roof/A pillars
• Back bumper/Luggage area
• Door handles/door cups
• Tire-splash
• Rocker Panels

Q: Will the film yellow over time?

A: It is natural for all urethane to discolor to some degree over time depending on how well the film is maintained, however our films have a built in UV inhibitor that will keep it from yellowing and UV damage.

Q: Do you have to order the clear bra kits?

A: No. We have a software program with up to date kits ready to be cut and installed.

Q: I don't like the line on the hood. Do you have a solutions?

A: Yes, on most vehicles we can cover the full hood, and fenders eliminating the line. We can also cover the entire vehicle if you wish to do so.

Q: I have an after market bumper, can you put Clearbra on it?

A: Yes, it takes more time but its no problem.

Q: Do I need to prep my car at all before installation?

A: We would greatly appreciate it if your vehicle is not covered in excessive dirt / debris. Otherwise, we would do the proper prep work to apply the clearbra.

Q: Is there a tint I can put on my lights?

A: Yes, we carry Smoked Light films.

Q: Is the film for the light similar to window tint?

A: No, the film used for lights are more like Clear Bra film that is tinted.

Q: What colors or shades does Mr. Tint carry?

A: We carry 20%, 50% and a clear film for the lights, and if you want a different color other than black we can order it for you.

Q: If I have my own film will Mr. Tint install it for me?

A: Yes we will.

Q: How long does it take to install Smoked Light Film?

A: Generally it will take around 2 hours.

Q: Is the process permanent?

A: Smoked Light film can be removed if desired.

Q: How long does it last?

A: Under good conditions Smoked Lights will last up to 5-10 years

Q: Do you Guarantee your work?

A: Yes, we back it with a 2 year warranty.